This page lists the OS/platform services that contact the network without you opening an app. Each entry names the endpoint, when it runs, what leaves the device, and exactly how to turn it off. Connections an app makes when you use it — including bundled Modern Apps — are out of scope here. Rows marked “cellular” travel over the phone network's own signaling or your carrier's systems rather than to a website-style server; they are included because a reasonable person would not necessarily know they exist, not because they are optional extras — the ordinary facts of having a SIM (making calls, sending texts, being registered on the network) are not listed.
MAOS has not been released yet
MAOS Privacy
Every network connection the OS makes by default.
MA Project servers
| Connection | Endpoint | When / default | What leaves the device | How to turn it off |
|---|---|---|---|---|
| Connectivity check & captive-portal detection | https://maproj.org/generate_204 |
On by default (MAOS servers). Runs when a network connects and to detect captive portals. | A plain generate_204 request — no account, device ID or body. The server sees your IP address, as any server does. |
Settings › Network & internet › Internet connectivity checks › Off. (Choosing “Standard (Google) server” instead moves the check to Google.) |
| HTTPS time | https://maproj.org/generate_204 |
On by default when automatic time is on. The same URL doubles as the time source; the NTP server list is emptied, so no NTP server is contacted. | A plain request whose response date/time is read. No identifiers. | Settings › System › Date & time › turn off Automatic date and time. There is no separate server picker for time. |
| System (OTA) updates | https://ota.maproj.org/<device>-<channel>, then the OTA zip from the same host |
On by default. The Updater checks about every 6 hours and downloads an update when one exists. | A request naming your device codename and update channel (for example pixel…-stable) — needed to find the right build. No unique device ID. |
Cannot be disabled in Settings: the Updater has no on/off toggle (only channel, network-type and battery/charging choices, plus manual “Check for updates”). Automatic checks stop only if you never connect to a network. |
| Private DNS probe | *‑dnsotls‑ds.dnscheck.maproj.org (a one-time random hostname) |
Off unless you enable it. Only runs when Private DNS is set to a strict provider hostname; the default is Automatic, which never probes. | One DNS lookup of a random one-time hostname, to verify the strict resolver answers. | Settings › Network & internet › Private DNS › Off or Automatic stops the probe. |
| SUPL (assisted GNSS) | supl.maproj.org:7275 (TLS) |
On by default (MAOS servers). Runs when GPS needs assistance data to get a faster fix — only while location is in use. | A SUPL session carrying the nearby cell/network information the protocol needs to return satellite assistance data. It is proxied to the upstream SUPL service without logging payloads. | Settings › Location › Secure User Plane Location (SUPL) › Off. (Fixes get slower, especially with PSDS also off.) |
| PSDS (predicted satellite data) | https://static.maproj.org/psds/… |
On by default (MAOS servers). Downloads predicted satellite data periodically so GPS fixes stay fast. | A plain file download for your GNSS chipset type. No identifiers. | Settings › Location › Predicted Satellite Data Service (PSDS) › Off. |
| Certificate Transparency log list | https://static.maproj.org/android/certificate_transparency/ |
On by default (MAOS servers). Fetches the current CT log list about once a day. | A plain download of the public log-list files. No identifiers. | Settings › Network & internet › Certificate Transparency downloads › Off. (Or “Standard (Google) server” to fetch it from Google instead.) |
| Remote Key Provisioning (attestation keys) | https://rkp.maproj.org/v1 (a proxy to Google's RKP server) |
On by default (MAOS servers). Runs only when the device needs new attestation keys provisioned — when keys run low or expire. | A certificate-signing request containing the hardware attestation information needed to issue the keys. MAOS proxies it so the device never contacts Google directly. | Cannot be disabled in Settings: Settings › Network & internet › Attestation key provisioning offers only “MAOS servers” or “Google server” — there is no Off. It stays idle unless keys are actually needed. |
| Widevine provisioning (DRM) | https://wv.maproj.org (a proxy to Google's Widevine provisioning server) |
On by default (MAOS servers). Runs only when an app asks to provision Widevine DRM — never in the background on its own. | The DRM provisioning request produced by the Widevine component for that app. MAOS proxies it so the device never contacts Google directly. | Cannot be disabled in Settings: Settings › Network & internet › Widevine provisioning offers only “MAOS servers” or “Google server”. Nothing is sent unless an app requests provisioning. |
Carrier servers
These go to your mobile carrier (or, where noted, a server your carrier's configuration names) rather than to MA Project servers.
| Connection | Endpoint | When / default | What leaves the device | How to turn it off |
|---|---|---|---|---|
| DNS resolution | Your network's DNS resolvers, or your chosen Private DNS provider | Always, whenever anything resolves a name. There is no MAOS DNS server and no hardcoded fallback resolver. | The hostnames you (or the system services above) look up, visible to the resolver operator — your carrier/ISP by default, or your Private DNS provider. | Cannot be disabled while using a network. To change who sees lookups: Settings › Network & internet › Private DNS — pick a provider hostname, Automatic, or Off (plain DNS to the network resolver). |
| Time from your carrier (NITZ) — cellular signaling, not internet | Your carrier's cell network (no server, no IP connection) | On by default, as part of automatic time. When the phone registers, the carrier broadcasts the current time; MAOS prefers this over the HTTPS time above when both are available. | Nothing is sent — the time is broadcast by the tower and received passively. The carrier learns nothing from this beyond your phone being registered, which it already knows. | Settings › System › Date & time › turn off Automatic date and time. The clock then only moves when you set it (GNSS time is received passively during a location fix and is not sent anywhere either). |
| Automatic time zone | On-device offline database (no server) | On by default. MAOS works the zone out from location on the device, against a bundled offline database; time-zone fixes from the carrier are turned off in MAOS, and the zone database itself only changes with a system (OTA) update. | Nothing leaves the device for the lookup itself — it uses the same location the system already has. (Getting that location may involve the SUPL/PSDS and scanning rows here.) | Settings › System › Date & time › turn off Set time zone automatically, then pick a zone manually. |
| IMS registration (VoLTE / Wi-Fi calling) — carrier connection | Your carrier's IMS core (reached over mobile data or Wi-Fi; your carrier assigns the address) | Registers automatically when a SIM that supports it is active, so calls can run over LTE or Wi-Fi instead of the older voice network. Wi-Fi calling itself is off until you turn it on for a SIM. | A standard SIP registration identifying the SIM/subscription to your carrier, from your carrier-assigned IP address. This is part of having phone service with that carrier. | Settings › Network & internet › SIMs › turn off Wi-Fi calling / the SIM's VoLTE option where shown, or turn the SIM off entirely. There is no single “IMS off” switch; disabling the SIM ends the registration. |
| RCS messaging plumbing — carrier connection | Your carrier's RCS/IMS servers; the provisioning address comes from your carrier's configuration (some carriers point it at Google's Jibe platform) | Only when RCS is turned on in the Communicate app and your carrier offers it. Registration reuses the IMS registration above; a separate provisioning request fetches your carrier's RCS settings. | Your phone number and SIM identity to the carrier's RCS service, and — for contact capability checks — the phone numbers being checked, as the RCS standard requires. | Turn RCS off in Communicate's settings. SMS/MMS are unaffected. |
| Carrier entitlement (activating Wi-Fi calling & similar features) — carrier connection | Your carrier's entitlement server (address supplied by your carrier's configuration); activation notifications use Google Firebase Cloud Messaging (project wfcactivation-e5dd9) |
Only for carriers that require this activation step, and only when a covered feature is being set up or periodically re-checked. Most carriers never trigger it. | The entitlement protocol's device/SIM identifiers to your carrier, and a Firebase push token registered with Google so the carrier can notify the phone about activation. | Cannot be disabled in Settings as its own item; it does not run unless a carrier-required feature (such as Wi-Fi calling) is in use, so turning that feature off stops it. |
| Visual voicemail — carrier connection | Your carrier's voicemail server (address/number supplied by your carrier's configuration; some carriers activate it by SMS) | Only when your carrier offers visual voicemail and it is turned on in the phone app. It then syncs when voicemail arrives. | Your phone number/SIM identity and voicemail metadata to your carrier, so it can return your messages. | Turn Visual voicemail off in the phone app's voicemail settings. |
| Emergency-call location (network-requested SUPL) — cellular connection | Your carrier's location service, requested by the network during an emergency call | Only during/after an emergency call, when the carrier's network asks the phone for its position so responders can be sent to you. This is separate from the everyday SUPL row above. | Your location at that moment, to the carrier/emergency network that requested it. | Cannot be disabled in Settings: it is part of how emergency calls locate you on modern networks. Keeping Location off does not block a carrier's emergency location request. |
| GNSS chipset assistance (vendor configuration) | supl.google.com:7275 in the Pixel GNSS chipset's vendor configuration file (/vendor/etc/gnss/gps.xml) |
The chipset file shipped with the device names Google's SUPL server directly. MAOS separately tells the framework to use supl.maproj.org (the SUPL row above); which of the two the chipset ultimately uses can only be settled on a running device, so both are listed here rather than guessing. |
The same SUPL session content as the SUPL row above, if the chipset uses this address. | Settings › Location › Secure User Plane Location (SUPL) › Off turns SUPL assistance off altogether. |
| eSIM profile download | The SM-DP+ server named in the activation code you scan or enter (your new carrier's server) | Only when you add an eSIM. MAOS does not run background SM-DS discovery: nothing is looked up until you supply an activation code. | The eSIM download handshake (the eUICC's identifiers and the activation code) to that carrier's server, as the GSMA eSIM standard requires. | User-started only: nothing to turn off. Not adding an eSIM means no connection. |
| Offline location databases | https://data.maproj.org/geocoder/… and https://data.maproj.org/wps/… |
Only when you tap to download them in the Network Location app. They are several gigabytes, so the download is user-started and unmetered-network only. Once present, network location and geocoding work entirely on-device. | Plain file downloads. No identifiers, and no list of the places or beacons you later look up — lookups happen on the device. | Don't download them (the provider then simply finds nothing), or delete the app's data. There is no background refresh to switch off. |
Local radio (no server)
| Connection | Endpoint | When / default | What leaves the device | How to turn it off |
|---|---|---|---|---|
| Wi-Fi & Bluetooth scanning — local radio only, no server | Nearby access points and Bluetooth devices (broadcast radio, no internet connection) | When Location is on and an app or the system asks for a network-based fix, the radios scan: Wi-Fi probe requests are broadcast locally, and nearby beacons are heard passively. “Always allow scanning” is off by default. | Wi-Fi probe requests announce the phone's (rotating, randomised) radio address to nearby access points; nothing is sent to a server by the scan itself. What the location provider then looks up stays on-device (see the row above). | Settings › Location › Location services › turn off Wi-Fi scanning and Bluetooth scanning, or turn Location off. |